Here are some sources from the web that will help you on how to install ceramic tile:
How To: Install Ceramic Tile
Installing ceramic tile can be tricky. Successful tiling jobs are a direct result of good planning and a methodical approach. Take the time to do the right amount of prep work before you begin.
STEP 1: Assess
Begin by inspecting the surface upon which you plan to install the tile. The substrate, or what tile is installed on top of, is just as important as the tile itself. A flexing floor or a wall that is uneven can lead to broken tiles and failed grout.
Water-resistant backer board, not drywall, should be used under tile that is likely to get wet (shower walls and bathroom floors, for example). Whether it’s backer board, plywood, or concrete, the substrate needs to be sound, clean, and dimensionally stable. Surfaces need to be level or plumb and true to plane, as the pros say—that means no bumps. Wallpaper, loose plaster, flaking paint, peeling tiles or unsecured sheet flooring must be removed from the walls or floors that are to be tiled.
STEP 2: Measure
Walls—When tiling a wall, you’ll want to establish a top line that is level. Few walls are truly plumb, so use a level to mark the top line. Establish its height so that you won’t have to cut very thin tiles (or cut very thin shards from nearly full tiles) to come flush to the floor. Snap a top line on your walls, and then snap a center line, too. Be sure to lay out all the walls you plan to do before you begin tiling.
Floors—To make your finished ceramic tile surface appear symmetrical (even if it isn’t), you need to find the center of the surface first. Then measure in from the sides. Pay special attention to this step if you’re tiling a small area, where wide tiles at one edge and narrow ones at the other will make the whole job look out of balance.
VIDEO: How to Install a Transition Strip From Carpet to Ceramic Tile
How to Install A Ceramic Tile Floor
Installing a ceramic tile floor may appear to be beyond the abilities of some homeowners, but most DIYers can handle it. Just don’t rush it — have a little patience! The materials are relatively easy to work with, and you can rent the tools, even the big ones.
Install ceramic tile over a subfloor that’s no less than 1 1/8 inches thick. A thinner subfloor will cause the floor to flex due to the weight of the tile. A flexing subfloor results in cracked tiles and grout — and a lot of headaches. Most tile manufacturers recommend installing a cement backer board instead of any other type of underlayment, such as plywood. The boards come in 3-x-5-foot sheets and are available where tile and grout are sold. Lear More Here.
Porcelain & Ceramic Tile That Looks Like Wood – The Definitive Buyers Guide
One of the biggest new trends in home decor over the past few years is the rise of porcelain and ceramic tile that looks like wood. This kind of wood tile has always been available but has only recently found favor with global decor trendsetters, thanks in large part to vastly improved technologies that make the wood more realistic than ever. Read More Here.